洗车工艺检测标准
Test Standard for Car Washing Process
1)冲洗漆面标准：漆面无可见泥沙，轮胎、翼子板内侧无残留泥沙。车身无其他污染物。 2)喷沫标准：均匀覆盖车身，擦涂时应注意从上到下的顺序。上下的海绵要分开，轮胎轮毂清理需用毛刷刷洗。 3)二次清洗标准：漆面无残余泡沫与未清理掉的脏污。 4)擦水标准：漆面无残余水痕，各板金缝隙内无余水，行车不滴水。玻璃干净明亮。 5)内室清理标准：内室无浮土，表台干净上蜡，脚垫无积沙，地胶无砂砾。 6)外饰标准：轮胎干净，塑件干净，轮毂无残余油泥。灯罩干净。金属镀件明亮。 7)玻璃标准：风挡玻璃干净明亮、无脏污油膜、烟膜、油渍、水痕等污染
1) Flushing paint surface standard: no visible sediment on the paint surface, no residual sediment on the inside of tires and fenders. There are no other pollutants in the body. 2) Spray standard: cover the body evenly, and pay attention to the order from top to bottom when painting. The upper and lower sponges should be separated, and the wheel hub should be cleaned with a brush. 3) two cleaning standard: no residual foam and uncleaned dirt. 4) Wiping standards: no residual water marks on the paint surface, no residual water in the cracks of each plate and gold, no drip in driving. The glass is clean and bright. 5) Cleaning standard of inner room: no floating soil in Inner room, clean wax on table, no sand accumulation on foot mat and no gravel on ground glue. 6) Exterior decoration standards: clean tires, clean plastic parts, no residual sludge in the hub. The lampshade is clean. The metal plating is bright. 7) Glass standard: clean and bright windshield, no dirty oil film, smoke film, oil stain, water mark and other pollution