联系我们

联系人:李经理

电话:0312-2135111

传真:0312-2152233

售后/配件:0312-2121599

地址:保定市东二环与南二环交叉口

新闻动态
重汽轴距的选择
1、车厢长度.2、整车长度。3、如果是自卸车,还要特别注意一下后悬长度。
1. The length of the car is.2 and the length of the whole car. 3, if it is dump truck, pay special attention to the rear suspension length.
以上三个长度,要根据你的工况、运输条件等来确定。
The above three lengths should be determined according to your working conditions and transportation conditions.
举例:1、用户需要的载货量,来确定车厢长度。因为这牵扯到运价的问题。2、如果工地较小,不要选太长的车,不然转弯都不行。3、后悬不要太长,不然容易把车头撅起来,尤其是上坡时坡度太大的话。
For example: 1, the volume of freight required by the user to determine the length of the carriage. Because it is involved in the problem of freight rates. 2, if the construction site is small, do not choose too long a car, otherwise it will not be able to turn. 3, the rear suspension should not be too long, otherwise it would be easy to pat up the front part of the car, especially when the uphill slope is too large.

保定市瑞日汽车销售服务有限公司

  1. 联系人:李经理
  2. 电话:0312-2135111
  3. 传真:0312-2152233
  4. 售后/配件:0312-2121599
  5. 网址:www.baodingqimao.com
  6. 地址:保定市东二环与南二环交叉口

版权©保定市瑞日汽车销售服务有限公司 保定代理记账 保定空调维修 保定平面设计培训 保定网站建设保定网络公司